Schluter Systems

Explore Schluter-Systems at Ceramed — complete tile system solutions: waterproof membranes, profiles, finish trims, and radiant floor support. Performance and durability for both pros and homeowners.

4003 products

Sort by:

Best selling

Featured

Best selling

Alphabetically, A-Z

Alphabetically, Z-A

Price, low to high

Price, high to low

Date, old to new

Date, new to old

Sort by:

Best selling

Featured

Best selling

Alphabetically, A-Z

Alphabetically, Z-A

Price, low to high

Price, high to low

Date, old to new

Date, new to old

Brand

Schluter Systems 4003

Product type

Accessory for underfloor heating 1
Adhesive sealant 3
Adhesive tape 2
Angle grinder accessory 1
Balcony profile 15
Baseboard for ceramic 154
Bridle ring 11
Bridle set 2
Cable for underfloor heating with membrane 33
Ceramic molding connector 21
Ceramic mortar 2
Ceramic step nose 149
Ceramic tile spacer 1
Ceramic transition 19
Circuit tester 1
Clamping pliers 1
Connector for balcony profile 8
Corner for balcony profile 5
Decorative flexible molding for ceramic edging 26
Decorative molding 9
Decorative molding for ceramic border 886
Decorative rounded molding for ceramics 236
Decoupling membrane 6
Double-sided adhesive tape 2
Edge banding 3
Edging profile for ceramics 243
End cap for ceramic molding 39
Grille de douche linéaire 1
Ground sensor 1
Insert for step nose 16
Inside corner for ceramic molding 333
J-shaped metal molding 1
Joint reinforcement strip 1
Laying mortar 4
Linear shower drain 61
Linear shower grid 109
Membrane for underfloor heating 4
Metal finishing plinth 32
Metal T-molding 4
Metal wall base 23
Molding accessory 2
Movement & expansion joint for ceramic 2
Movement joints for ceramics 257
Outside and inside corner for ceramic molding 92
Outside corner for ceramic molding 394
Paving support 7
Perimeter joint for ceramic 1
Preformed waterproof corner 2
Primer 5
Reducer for ceramics 106
Screed 8
Screening tool 1
Sealing strip 12
Self-adhesive membrane for underfloor heating 7
Shear 1
Shear blade 1
Shower base 47
Shower bench 4
Shower construction panel 21
Shower drain connector 1
Shower duct kit 27
Shower flange assembly 1
Shower hardware 17
Shower niche 11
Shower profile 20
Shower shelf 212
Shower surround 3
Shower systems 2
Shower waterproofing membrane 8
Silicone sealant 1
Standard shower drain 2
Standard shower grid 53
Surface protection film 1
T-shaped molding for ceramic 8
Thermostat 1
Thermostats 5
Tile edge profile 1
Trowel 6
Underfloor heating kit 1
Underfloor heating repair kit 1
Underfloor heating system 1
Underground drainage component 1
Vinyl J-molding 41
Vinyl molding 6
Vinyl reducer 31
Vinyl roller 1
Vinyl stair nosing 78
Vinyl T-molding 2
Waterproofing membrane 21

Design

Schluter KERDI-BOARD-KIT 1
Schluter KERDI-DRAIN 11
Schluter KERDI-DRAIN-A 2
Schluter KERDI-DRAIN-H 2
Schluter KERDI-SHOWER-CB 1
Schluter KERDI-SHOWER-KIT 5
Schluter KERDI-SHOWER-LT 3
Schluter KERDI-SHOWER-LTS 2
Schluter KERDI-SHOWER-R 1
Schluter KERDI-SHOWER-T 2
Schluter KERDI-SHOWER-TT 2
Schluter-KERDI-DRAIN 10
Schluter-KERDI-SHOWER-KIT 7
SHELF-E 128
SHELF-N 42
SHELF-W 41

Drain Position

Centré 5
Décentré 1
Center 29
Offset 12

Drain Length

3/4 6
1-3/8" 3
19-11/16" 2
23-5/8" 2
27-9/16" 4
31-1/2" 4
35-7/16" 4
39-3/8" 4
43-5/16" 4
47-1/4" 4
51-3/16" 2
55-1/8" 2
59-1/16" 2
62-15/16" 2
66-7/8" 2
70-13/16" 2
4' 2
8' 4
1-1/16" x 48" 2
29/32" x 27-9/16" 1
3' 3 X3' 3 1
3/4" x 31-1/2" 1
3/4" x 47-1/4 1

Features

Programmable 4
Non-programmable 1
Wi-Fi 2
Ecran Tactile 1
Écran couleur 2

Voltage (V)

120 16
240 18

Material

Aluminum 189
Plastic 34
Polyvinyl chloride (PVC) 16
Stainless steel 98

Finish

Poli 15
Chromé 3
Brossé 76
Finish 228

Shelf Type

Étagère d'angle 128
Tablette 84

Shape

Arrondie 25
Carré 11
Pentagonale 44
Quadrilaterale 44
Rectangulaire 96
Triangulaire 41

Length (in.)

100 mm (3" 15/16") 162
1000 mm (39") 1
102 mm (4" 1/64") 2
120 mm (4" 23/32") 3
1500 mm (4" 11 1/16") 2
1500 mm (59") 1
15240 mm (600") 4
1830 mm (72" 1/32") 4
203 mm (8") 1
2438.4 mm (96") 1
2500 mm (8" 2 27/64") 1787
2500 mm (8" 2 27/64) 65
2500 mm (98" 1/2") 10
2501.9 mm (8" 2" 1/2) 1
30 mm (1" 3/16") 1
3000 mm (10") 1
3000 mm (118") 3
3000 mm (120") 18
3000 mm (9" 10 7/64") 29
3048 mm (120") 32
3048 mm (98" 19/32") 4
3100 mm (100") 2
45 mm (1" 49/64") 53
50 mm (1" 31/32") 251
52 mm (2" 3/64") 33
75 mm (2" 61/64") 2
8 mm (5/16") 6

Width (in.)

10 mm (25/64") 1
10 mm (29/64") 3
10 mm (3/8") 2
100 mm (3" 15/16") 48
102 mm (35/64") 2
102 mm (4 1/64") 1
102 mm (4" 1/64") 1
109 mm (2" 29/64") 1
11 mm (7/16") 12
12 mm (15/32") 2
12.5 mm (1/2") 14
12.7 mm (1/2") 196
13.49 mm (17/32") 1
14 mm (17/32") 1
14 mm (35/64") 2
15 mm (19/32") 10
15 mm (9/16") 11
18 mm (45/64") 1
18 mm (98" 1/2") 1
2 mm (3/32") 8
2 mm (5/64") 9
2 mm (5/8") 1
20 mm (3/4") 4
25 mm (1") 20
254 mm (3" 1/8") 1
26 mm (1" 1/32") 18
28 mm (1" 7/64") 1
3 mm (1/8") 227
3 mm (5/16") 33
3.5 mm (1/8") 31
3.5 mm (3/8") 2
30 mm (1" 1/8") 1
30 mm (1" 3/16") 7
31 mm (1" 7/32") 5
32 mm (1" 17/64") 1
32 mm (98" 1/2") 1
33 mm (1" 19/64") 1
35 mm (1" 3/8") 2
36 mm (1" 27/64") 1
38 mm (1" 1/2") 3
4 mm (5/32") 1
4.5 mm (11/64") 40
4.5 mm (3/16") 1
40 mm (1" 37/64") 1
42 mm (1" 21/32") 7
42 mm (1" 5/8") 3
43 mm (1" 11/16") 1
43 mm (7/8") 1
44 mm (1" 47/64") 4
45 mm (1" 49/64") 53
5 mm (13/64") 1
5 mm (3/16") 1
5.5 mm (7/32") 1
50 mm (1" 31/32") 321
52 mm (2" 3/64") 1
55 mm (2" 11/64") 1
56 mm (2" 3/16") 3
57 mm (2" 1/4") 1
6 mm (1/4") 27
60 mm (2" 3/8") 1
68 mm (2" 11/16") 1
7 mm (9/32") 3
75 mm (2" 61/64") 2
8 mm (5/16") 152
8.5 mm (21/64") 4
9 mm (23/64") 2
9.53 mm (3/8") 3

Thickness (mm)

10 mm (3/8") 744
102 mm (35/64") 2
11 mm (7/16") 279
110 mm (4" 21/64") 3
12.5 mm (1/2") 636
12.5 mm (31/64") 1
12.7 mm (1/2") 2
120 mm (4" 23/32") 1
13 mm (33/64") 3
14 mm (35/64") 12
14.29 mm (9/16") 1
15 mm (19/32") 15
16 mm (5/8") 20
160 mm (6" 19/64") 4
17.5 mm (11/16") 5
18 mm (45/64") 23
18.5 mm (23/32") 8
18.5 mm (47/64") 4
2 mm (3/32") 5
20 mm (25/32") 1
20 mm (3/4") 11
21 mm (53/64") 3
22.5 mm (57/64") 6
25 mm (1") 14
25 mm (63/64") 20
26 mm (1" 1/32") 4
27.5 mm (1" 5/64") 1
3 mm (1/8") 35
3.5 mm (9/64") 1
30 mm (1" 1/8") 1
30 mm (1" 3/16") 5
36 mm (1" 27/64") 4
4 mm (3/16") 6
4 mm (5/32") 7
4.5 mm (11/64") 42
40 mm (1" 37/64") 1
5 mm (3/16") 6
5.5 mm (7/32") 5
50 mm (1" 31/32") 1
52 mm (2" 1/8") 2
52 mm (2" 3/64") 4
55 mm (2" 5/32") 1
59 mm (2" 21/64") 2
6 mm (1/4") 260
6.5 (17/64") 1
6.5 mm (1/4") 3
60 mm (2" 23/64") 4
60 mm (2" 3/8") 8
61 mm (2" 13/32") 1
7 mm (9/32") 24
7.5 mm (19/64") 2
70 mm (2" 3/4") 1
8 mm (5/16") 479
8.5 mm (21/64") 8
80 mm (3" 5/32") 16
9 mm (11/32") 2
9 mm (23/64") 41
9.53 mm (3/8") 1
95 mm (3" 47/64") 1

Color

Silver 77
Beige 354
White 265
Bronze 23
Clear 2
Gray 1605
Yellow 112
Brown 226
Black 329
Gold 2
Orange 41
Rose 89

Price

$1,634.62

Schluter - DILEX-BWA Perimeter Movement Joint Profile Isolates Tile from Structures - Bright White PVC Plastic 3/16" (4.5 mm) x 8' 2-1/2"

10% Discount

Schluter - DILEX-BWA Profilé de joint de mouvement de périmètre isolant le carrelage des structures - plastique PVC blanc éclatant 3/16" (4.5 mm) x 8' 2-1/2"

Schluter Systems

SKU: BWA45BW

Schluter - DILEX-BWA Perimeter Movement Joint Profile Isolates Tile from Structures - Bright White PVC Plastic 3/16" (4.5 mm) x 8' 2-1/2"

Sale price: $24.44

Regular price

$27.16
Regular price: $27.16

Schluter - RENO-TK Reducing Profile - Matte Nickel Anodized Aluminum 5/16" (8 mm) x 8' 2-1/2"

10% Discount

Schluter - RENO-TK Profilé réducteur - aluminium anodisé nickel mat 5/16" (8 mm) x 8' 2-1/2"

Schluter Systems

SKU: ATK80AT

Schluter - RENO-TK Reducing Profile - Matte Nickel Anodized Aluminum 5/16" (8 mm) x 8' 2-1/2"

Sale price: $24.45

Regular price

$27.17
Regular price: $27.17

Schluter - RENO-TK Reducing Profile - Bright Chrome Anodized Aluminum 3/8" (10 mm) x 8' 2-1/2"

10% Discount

Schluter - RENO-TK Profilé réducteur - aluminium anodisé chrome brillant 3/8" (10 mm) x 8' 2-1/2"

Schluter Systems

SKU: ATK100ACB

Schluter - RENO-TK Reducing Profile - Bright Chrome Anodized Aluminum 3/8" (10 mm) x 8' 2-1/2"

Sale price: $23.72

Regular price

$26.36
Regular price: $26.36

Schluter - SCHIENE Wall/Floor Edge Profile Matte Anodized Aluminum 1" (25 mm) x 8' 2-1/2"

10% Discount

Schluter - SCHIENE Profilé de bordure pour mur/plancher aluminium anodisé mat 1" (25 mm) x 8' 2-1/2"

Schluter Systems

SKU: AE250

Schluter - SCHIENE Wall/Floor Edge Profile Matte Anodized Aluminum 1" (25 mm) x 8' 2-1/2"

Sale price: $23.75

Regular price

$26.39
Regular price: $26.39

Schluter - Reno-Tk-Radius Transition 1/4 Alum Mat

10% Discount

Schluter Systems

SKU: R/AETK60

Schluter - Reno-Tk-Radius Transition 1/4 Alum Mat

Sale price: $24.66

Regular price

$27.40
Regular price: $27.40

Schluter - RONDEC-STEP 90° Outside Corner with 2-1/4" Vertical Leg - Matte Nickel Anodized Aluminum 5/16" (8 mm)

10% Discount

Schluter - RONDEC-STEP Coin extérieur 90° avec ailette verticale de 2-1/4" - aluminium anodisé nickel mat 5/16" (8 mm)

Schluter Systems

SKU: E90RS80AT57

Schluter - RONDEC-STEP 90° Outside Corner with 2-1/4" Vertical Leg - Matte Nickel Anodized Aluminum 5/16" (8 mm)

Sale price: $24.84

Regular price

$27.61
Regular price: $27.61

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Nickel Anodized Aluminum 5/16" (8 mm)

10% Discount

Schluter - RONDEC-STEP Coin extérieur 90° avec ailette verticale de 1-1/2" - aluminium anodisé nickel mat 5/16" (8 mm)

Schluter Systems

SKU: E90RS80AT39

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Nickel Anodized Aluminum 5/16" (8 mm)

Sale price: $24.84

Regular price

$27.61
Regular price: $27.61

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Copper Anodized Aluminum 5/16" (8 mm)

10% Discount

Schluter - RONDEC-STEP Coin extérieur 90° avec ailette verticale de 1-1/2" - aluminium anodisé cuivre mat 5/16" (8 mm)

Schluter Systems

SKU: E90RS80AK39

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Copper Anodized Aluminum 5/16" (8 mm)

Sale price: $24.84

Regular price

$27.61
Regular price: $27.61

Schluter - RONDEC-STEP 90° Outside Corner with 2-1/4" Vertical Leg - Matte Anodized Aluminum 5/16" (8 mm)

10% Discount

Schluter - RONDEC-STEP Coin extérieur 90° avec ailette verticale de 2-1/4" - aluminium anodisé mat 5/16" (8 mm)

Schluter Systems

SKU: E90RS80AE57

Schluter - RONDEC-STEP 90° Outside Corner with 2-1/4" Vertical Leg - Matte Anodized Aluminum 5/16" (8 mm)

Sale price: $24.84

Regular price

$27.61
Regular price: $27.61

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Anodized Aluminum 5/16" (8 mm)

10% Discount

Schluter - RONDEC-STEP Coin extérieur 90° avec ailette verticale de 1-1/2" - aluminium anodisé mat 5/16" (8 mm)

Schluter Systems

SKU: E90RS80AE39

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Anodized Aluminum 5/16" (8 mm)

Sale price: $24.84

Regular price

$27.61
Regular price: $27.61

Schluter - RONDEC-STEP 90° Outside Corner with 2-1/4" Vertical Leg - Matte Nickel Anodized Aluminum 1/2" (12.5 mm)

10% Discount

Schluter - RONDEC-STEP Coin extérieur 90° avec ailette verticale de 2-1/4" - aluminium anodisé nickel mat 1/2" (12.5 mm)

Schluter Systems

SKU: E90RS125AT57

Schluter - RONDEC-STEP 90° Outside Corner with 2-1/4" Vertical Leg - Matte Nickel Anodized Aluminum 1/2" (12.5 mm)

Sale price: $24.84

Regular price

$27.61
Regular price: $27.61

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Nickel Anodized Aluminum 1/2" (12.5 mm)

10% Discount

Schluter - RONDEC-STEP Coin extérieur 90° avec ailette verticale de 1-1/2" - aluminium anodisé nickel mat 1/2" (12.5 mm)

Schluter Systems

SKU: E90RS125AT39

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Nickel Anodized Aluminum 1/2" (12.5 mm)

Sale price: $24.84

Regular price

$27.61
Regular price: $27.61

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Copper Anodized Aluminum 1/2" (12.5 mm)

10% Discount

Schluter - RONDEC-STEP Coin extérieur 90° avec ailette verticale de 1-1/2" - aluminium anodisé cuivre mat 1/2" (12.5 mm)

Schluter Systems

SKU: E90RS125AK39

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Copper Anodized Aluminum 1/2" (12.5 mm)

Sale price: $24.84

Regular price

$27.61
Regular price: $27.61

Schluter - RONDEC-STEP 90° Outside Corner with 2-1/4" Vertical Leg - Matte Anodized Aluminum 1/2" (12.5 mm)

10% Discount

Schluter - RONDEC-STEP Coin extérieur 90° avec ailette verticale de 2-1/4" - aluminium anodisé mat 1/2" (12.5 mm)

Schluter Systems

SKU: E90RS125AE57

Schluter - RONDEC-STEP 90° Outside Corner with 2-1/4" Vertical Leg - Matte Anodized Aluminum 1/2" (12.5 mm)

Sale price: $24.84

Regular price

$27.61
Regular price: $27.61

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Anodized Aluminum 1/2" (12.5 mm)

10% Discount

Schluter - RONDEC-STEP Coin extérieur 90° avec ailette verticale de 1-1/2" - aluminium anodisé mat 1/2" (12.5 mm)

Schluter Systems

SKU: E90RS125AE39

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Anodized Aluminum 1/2" (12.5 mm)

Sale price: $24.84

Regular price

$27.61
Regular price: $27.61

Schluter - RONDEC-STEP 90° Outside Corner with 2-1/4" Vertical Leg - Matte Nickel Anodized Aluminum 3/8" (10 mm)

10% Discount

Schluter - RONDEC-STEP Coin extérieur 90° avec ailette verticale de 2-1/4" - aluminium anodisé nickel mat 3/8" (10 mm)

Schluter Systems

SKU: E90RS100AT57

Schluter - RONDEC-STEP 90° Outside Corner with 2-1/4" Vertical Leg - Matte Nickel Anodized Aluminum 3/8" (10 mm)

Sale price: $24.84

Regular price

$27.61
Regular price: $27.61

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Nickel Anodized Aluminum 3/8" (10 mm)

10% Discount

Schluter - RONDEC-STEP Coin extérieur 90° avec ailette verticale de 1-1/2" - aluminium anodisé nickel mat 3/8" (10 mm)

Schluter Systems

SKU: E90RS100AT39

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Nickel Anodized Aluminum 3/8" (10 mm)

Sale price: $24.84

Regular price

$27.61
Regular price: $27.61

Schluter - RONDEC-STEP 90° Outside Corner with 2-1/4" Vertical Leg - Matte Brass Anodized Aluminum 3/8" (10 mm)

10% Discount

Schluter - RONDEC-STEP Coin extérieur 90° avec ailette verticale de 2-1/4" - aluminium anodisé laiton mat 3/8" (10 mm)

Schluter Systems

SKU: E90RS100AM57

Schluter - RONDEC-STEP 90° Outside Corner with 2-1/4" Vertical Leg - Matte Brass Anodized Aluminum 3/8" (10 mm)

Sale price: $24.84

Regular price

$27.61
Regular price: $27.61

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Copper Anodized Aluminum 3/8" (10 mm)

10% Discount

Schluter - RONDEC-STEP Coin extérieur 90° avec ailette verticale de 1-1/2" - aluminium anodisé cuivre mat 3/8" (10 mm)

Schluter Systems

SKU: E90RS100AK39

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Copper Anodized Aluminum 3/8" (10 mm)

Sale price: $24.84

Regular price

$27.61
Regular price: $27.61

Schluter - RONDEC-STEP 90° Outside Corner with 2-1/4" Vertical Leg - Matte Anodized Aluminum 3/8" (10 mm)

10% Discount

Schluter - RONDEC-STEP Coin extérieur 90° avec ailette verticale de 2-1/4" - aluminium anodisé mat 3/8" (10 mm)

Schluter Systems

SKU: E90RS100AE57

Schluter - RONDEC-STEP 90° Outside Corner with 2-1/4" Vertical Leg - Matte Anodized Aluminum 3/8" (10 mm)

Sale price: $24.84

Regular price

$27.61
Regular price: $27.61

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Anodized Aluminum 3/8" (10 mm)

10% Discount

Schluter - RONDEC-STEP Coin extérieur 90° avec ailette verticale de 1-1/2" - aluminium anodisé mat 3/8" (10 mm)

Schluter Systems

SKU: E90RS100AE39

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Anodized Aluminum 3/8" (10 mm)

Sale price: $24.84

Regular price

$27.61
Regular price: $27.61

Schluter - RONDEC-STEP 135° Outside Corner with 1-1/2" Vertical Leg - Matte Nickel Anodized Aluminum 5/16" (8 mm)

10% Discount

Schluter - RONDEC-STEP Coin extérieur 135° avec ailette verticale de 1-1/2" - aluminium anodisé nickel mat 5/16" (8 mm)

Schluter Systems

SKU: E135RS80AT39

Schluter - RONDEC-STEP 135° Outside Corner with 1-1/2" Vertical Leg - Matte Nickel Anodized Aluminum 5/16" (8 mm)

Sale price: $24.84

Regular price

$27.61
Regular price: $27.61

Schluter - RONDEC-STEP 135° Outside Corner with 2-1/4" Vertical Leg - Matte Nickel Anodized Aluminum 1/2" (12.5 mm)

10% Discount

Schluter - RONDEC-STEP Coin extérieur 135° avec ailette verticale de 2-1/4" - aluminium anodisé nickel mat 1/2" (12.5 mm)

Schluter Systems

SKU: E135RS125AT57

Schluter - RONDEC-STEP 135° Outside Corner with 2-1/4" Vertical Leg - Matte Nickel Anodized Aluminum 1/2" (12.5 mm)

Sale price: $23.94

Regular price

$26.61
Regular price: $26.61

Schluter - RONDEC-STEP 135° Outside Corner with 1-1/2" Vertical Leg - Matte Nickel Anodized Aluminum 1/2" (12.5 mm)

10% Discount

Schluter - RONDEC-STEP Coin extérieur 135° avec ailette verticale de 1-1/2" - aluminium anodisé nickel mat 1/2" (12.5 mm)

Schluter Systems

SKU: E135RS125AT39

Schluter - RONDEC-STEP 135° Outside Corner with 1-1/2" Vertical Leg - Matte Nickel Anodized Aluminum 1/2" (12.5 mm)

Sale price: $23.94

Regular price

$26.61
Regular price: $26.61

Schluter - RONDEC-STEP 135° Outside Corner with 1-1/2" Vertical Leg - Matte Anodized Aluminum 1/2" (12.5 mm)

10% Discount

Schluter - RONDEC-STEP Coin extérieur 135° avec ailette verticale de 1-1/2" - aluminium anodisé mat 1/2" (12.5 mm)

Schluter Systems

SKU: E135RS125AE39

Schluter - RONDEC-STEP 135° Outside Corner with 1-1/2" Vertical Leg - Matte Anodized Aluminum 1/2" (12.5 mm)

Sale price: $23.94

Regular price

$26.61
Regular price: $26.61

Schluter - RONDEC-STEP 135° Outside Corner with 2-1/4" Vertical Leg - Matte Nickel Anodized Aluminum 3/8" (10 mm)

10% Discount

Schluter - RONDEC-STEP Coin extérieur 135° avec ailette verticale de 2-1/4" - aluminium anodisé nickel mat 3/8" (10 mm)

Schluter Systems

SKU: E135RS100AT57

Schluter - RONDEC-STEP 135° Outside Corner with 2-1/4" Vertical Leg - Matte Nickel Anodized Aluminum 3/8" (10 mm)

Sale price: $23.94

Regular price

$26.61
Regular price: $26.61

Schluter - RONDEC-STEP 135° Outside Corner with 1-1/2" Vertical Leg - Matte Nickel Anodized Aluminum 3/8" (10 mm)

10% Discount

Schluter - RONDEC-STEP Coin extérieur 135° avec ailette verticale de 1-1/2" - aluminium anodisé nickel mat 3/8" (10 mm)

Schluter Systems

SKU: E135RS100AT39

Schluter - RONDEC-STEP 135° Outside Corner with 1-1/2" Vertical Leg - Matte Nickel Anodized Aluminum 3/8" (10 mm)

Sale price: $23.94

Regular price

$26.61
Regular price: $26.61

Schluter - RONDEC-STEP 135° Outside Corner with 1-1/2" Vertical Leg - Matte Anodized Aluminum 3/8" (10 mm)

10% Discount

Schluter - RONDEC-STEP Coin extérieur 135° avec ailette verticale de 1-1/2" - aluminium anodisé mat 3/8" (10 mm)

Schluter Systems

SKU: E135RS100AE39

Schluter - RONDEC-STEP 135° Outside Corner with 1-1/2" Vertical Leg - Matte Anodized Aluminum 3/8" (10 mm)

Sale price: $23.94

Regular price

$26.61
Regular price: $26.61

Schluter - DILEX-BWB Surface Joint Profile with 3/8" Movement Zone - Light Beige PVC Plastic 1/4" (6 mm) x 8' 2-1/2"

10% Discount

Schluter - DILEX-BWB Profilé pour joint de surface avec zone de mouvement de 3/8" - plastique PVC Beige Clair 1/4" (6 mm) x 8' 2-1/2"

Schluter Systems

SKU: BWB60HB

Schluter - DILEX-BWB Surface Joint Profile with 3/8" Movement Zone - Light Beige PVC Plastic 1/4" (6 mm) x 8' 2-1/2"

Sale price: $25.04

Regular price

$27.83
Regular price: $27.83

Schluter - DILEX-BWB Surface Joint Profile with 3/8" Movement Zone PVC Plastic Black 1/4" (6 mm) x 8' 2-1/2"

10% Discount

Schluter - DILEX-BWB Profilé pour joint de surface avec zone de mouvement de 3/8" Plastique PVC Noir 1/4" (6 mm) x 8' 2-1/2"

Schluter Systems

SKU: BWB60GS

Schluter - DILEX-BWB Surface Joint Profile with 3/8" Movement Zone PVC Plastic Black 1/4" (6 mm) x 8' 2-1/2"

Sale price: $25.04

Regular price

$27.83
Regular price: $27.83

Schluter - DILEX-BWB Surface Joint Profile with 3/8" Movement Zone - PVC Plastic Grey 1/4" (6 mm) x 8' 2-1/2"

10% Discount

Schluter - DILEX-BWB Profilé pour joint de surface avec zone de mouvement de 3/8" - plastique PVC Gris 1/4" (6 mm) x 8' 2-1/2"

Schluter Systems

SKU: BWB60G

Schluter - DILEX-BWB Surface Joint Profile with 3/8" Movement Zone - PVC Plastic Grey 1/4" (6 mm) x 8' 2-1/2"

Sale price: $25.04

Regular price

$27.83
Regular price: $27.83

Schluter - JOLLY Flexible Edge Trim for Walls Aluminum Gray 3/8" x 8' 2-1/2"

10% Discount

Schluter - JOLLY Moulure flexible de bordure pour les murs Aluminium Gris 3/8" x 8' 2-1/2"

Schluter Systems

SKU: R/J100G

Schluter - JOLLY Flexible Edge Trim for Walls Aluminum Gray 3/8" x 8' 2-1/2"

Sale price: $24.91

Regular price

$27.68
Regular price: $27.68

…

126

83 of 126

Important Notice – Holidays Period

Popular collections

Shower Benches

Shower Bases and Sets

Cables for underfloor heating with membrane

Shower Drains & Grates

Membrane Heated Floor Kit

Shower Waterproofing Membranes

Underfloor heating membranes and guides

Shower Walls and Panels

Shower Niches

Engineered Flooring

Laminate Flooring

SPC Vinyl

Tile Leveling System

Shower Shelves

Decorative Tiles

Perfect Level Master

Schluter Systems

Liquidation

Shower curbs

Imitation Stone Wall Covering

Brick Veneer

Concrete Heated Floor Kit

Mosaics

Ceramic Trims

Thermostats

Ceramic adhesives

Mapei Ultracolor Plus FA Grout

Mapei

Tile Setting Materials

Shop By Dimensions

Schluter Systems

Schluter - DILEX-BWA Perimeter Movement Joint Profile Isolates Tile from Structures - Bright White PVC Plastic 3/16" (4.5 mm) x 8' 2-1/2"

Schluter - RENO-TK Reducing Profile - Matte Nickel Anodized Aluminum 5/16" (8 mm) x 8' 2-1/2"

Schluter - RENO-TK Reducing Profile - Bright Chrome Anodized Aluminum 3/8" (10 mm) x 8' 2-1/2"

Schluter - SCHIENE Wall/Floor Edge Profile Matte Anodized Aluminum 1" (25 mm) x 8' 2-1/2"

Schluter - Reno-Tk-Radius Transition 1/4 Alum Mat

Schluter - RONDEC-STEP 90° Outside Corner with 2-1/4" Vertical Leg - Matte Nickel Anodized Aluminum 5/16" (8 mm)

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Nickel Anodized Aluminum 5/16" (8 mm)

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Copper Anodized Aluminum 5/16" (8 mm)

Schluter - RONDEC-STEP 90° Outside Corner with 2-1/4" Vertical Leg - Matte Anodized Aluminum 5/16" (8 mm)

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Anodized Aluminum 5/16" (8 mm)

Schluter - RONDEC-STEP 90° Outside Corner with 2-1/4" Vertical Leg - Matte Nickel Anodized Aluminum 1/2" (12.5 mm)

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Nickel Anodized Aluminum 1/2" (12.5 mm)

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Copper Anodized Aluminum 1/2" (12.5 mm)

Schluter - RONDEC-STEP 90° Outside Corner with 2-1/4" Vertical Leg - Matte Anodized Aluminum 1/2" (12.5 mm)

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Anodized Aluminum 1/2" (12.5 mm)

Schluter - RONDEC-STEP 90° Outside Corner with 2-1/4" Vertical Leg - Matte Nickel Anodized Aluminum 3/8" (10 mm)

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Nickel Anodized Aluminum 3/8" (10 mm)

Schluter - RONDEC-STEP 90° Outside Corner with 2-1/4" Vertical Leg - Matte Brass Anodized Aluminum 3/8" (10 mm)

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Copper Anodized Aluminum 3/8" (10 mm)

Schluter - RONDEC-STEP 90° Outside Corner with 2-1/4" Vertical Leg - Matte Anodized Aluminum 3/8" (10 mm)

Schluter - RONDEC-STEP 90° Outside Corner with 1-1/2" Vertical Leg - Matte Anodized Aluminum 3/8" (10 mm)

Schluter - RONDEC-STEP 135° Outside Corner with 1-1/2" Vertical Leg - Matte Nickel Anodized Aluminum 5/16" (8 mm)

Schluter - RONDEC-STEP 135° Outside Corner with 2-1/4" Vertical Leg - Matte Nickel Anodized Aluminum 1/2" (12.5 mm)

Schluter - RONDEC-STEP 135° Outside Corner with 1-1/2" Vertical Leg - Matte Nickel Anodized Aluminum 1/2" (12.5 mm)

Schluter - RONDEC-STEP 135° Outside Corner with 1-1/2" Vertical Leg - Matte Anodized Aluminum 1/2" (12.5 mm)

Schluter - RONDEC-STEP 135° Outside Corner with 2-1/4" Vertical Leg - Matte Nickel Anodized Aluminum 3/8" (10 mm)

Schluter - RONDEC-STEP 135° Outside Corner with 1-1/2" Vertical Leg - Matte Nickel Anodized Aluminum 3/8" (10 mm)

Schluter - RONDEC-STEP 135° Outside Corner with 1-1/2" Vertical Leg - Matte Anodized Aluminum 3/8" (10 mm)

Schluter - DILEX-BWB Surface Joint Profile with 3/8" Movement Zone - Light Beige PVC Plastic 1/4" (6 mm) x 8' 2-1/2"

Schluter - DILEX-BWB Surface Joint Profile with 3/8" Movement Zone PVC Plastic Black 1/4" (6 mm) x 8' 2-1/2"

Schluter - DILEX-BWB Surface Joint Profile with 3/8" Movement Zone - PVC Plastic Grey 1/4" (6 mm) x 8' 2-1/2"

Schluter - JOLLY Flexible Edge Trim for Walls Aluminum Gray 3/8" x 8' 2-1/2"

Contact

Tools & Accessories

Flooring

Info