Ready-to-install Kits

Everything you need to build a 32 in × 38 in tiled shower: sloped shower tray with centred outlet, 2 in KERDI-DRAIN, KERDI-BOARD walls and complete KERDI-BAND waterproofing with preformed corners. For an off-centre outlet, the equivalent tray is available at the same price — write to us before ordering. Adjust the quantities your job site needs in one click.

Everything you need to build a 36 in × 36 in tiled shower: sloped shower tray with centred outlet, 2 in KERDI-DRAIN, KERDI-BOARD walls and complete KERDI-BAND waterproofing with preformed corners. For an off-centre outlet, the equivalent tray is available at the same price — write to us before ordering. Adjust the quantities your job site needs in one click.

Everything you need to build a 38 in × 38 in tiled shower: sloped shower tray with centred outlet, 2 in KERDI-DRAIN, KERDI-BOARD walls and complete KERDI-BAND waterproofing with preformed corners. For an off-centre outlet, the equivalent tray is available at the same price — write to us before ordering. Adjust the quantities your job site needs in one click.

Everything you need to build a 38 in × 38 in tiled shower: sloped shower tray with centred outlet, 2 in KERDI-DRAIN, KERDI-BOARD walls and complete KERDI-BAND waterproofing with preformed corners. For an off-centre outlet, the equivalent tray is available at the same price — write to us before ordering. Adjust the quantities your job site needs in one click.

Everything you need to build a 36 in × 48 in tiled shower: sloped shower tray with centred outlet, 2 in KERDI-DRAIN, KERDI-BOARD walls and complete KERDI-BAND waterproofing with preformed corners. For an off-centre outlet, the equivalent tray is available at the same price — write to us before ordering. Adjust the quantities your job site needs in one click.

Everything you need to build a 38 in × 60 in tiled shower: sloped shower tray with centred outlet, 2 in KERDI-DRAIN, KERDI-BOARD walls and complete KERDI-BAND waterproofing with preformed corners. For an off-centre outlet, the equivalent tray is available at the same price — write to us before ordering. Adjust the quantities your job site needs in one click.

Everything you need to build a 38 in × 60 in tiled shower: complete version: sloped tray, 2 in KERDI-DRAIN, 20 in × 38 in rectangular bench with KERSB135K preformed corners, 12 in × 6 in niche, and KERDI-BAND waterproofing with preformed corners. Adjust the quantities your job site needs in one click.

Everything you need to build a 38 in × 60 in tiled shower: sloped shower tray with centred outlet, 2 in KERDI-DRAIN, wall waterproofing with KERDI roll membrane (sized for 3 walls at 7 ft high), KERDI-BAND and preformed corners. Adjust the quantities your job site needs in one click.

Everything you need to build a 48 in × 48 in tiled shower: sloped shower tray with centred outlet, 2 in KERDI-DRAIN, KERDI-BOARD walls and complete KERDI-BAND waterproofing with preformed corners. For an off-centre outlet, the equivalent tray is available at the same price — write to us before ordering. Adjust the quantities your job site needs in one click.

Everything you need to build a 48 in × 60 in tiled shower: sloped shower tray with centred outlet, 2 in KERDI-DRAIN, KERDI-BOARD walls and complete KERDI-BAND waterproofing with preformed corners. For an off-centre outlet, the equivalent tray is available at the same price — write to us before ordering. Adjust the quantities your job site needs in one click.

Everything you need to build a 48 in × 60 in tiled shower: sloped shower tray with centred outlet, 2 in KERDI-DRAIN, wall waterproofing with KERDI roll membrane (sized for 3 walls at 7 ft high), KERDI-BAND and preformed corners. Adjust the quantities your job site needs in one click.

Everything you need to build a 48 in × 72 in tiled shower: sloped shower tray with centred outlet, 2 in KERDI-DRAIN, KERDI-BOARD walls and complete KERDI-BAND waterproofing with preformed corners. For an off-centre outlet, the equivalent tray is available at the same price — write to us before ordering. Adjust the quantities your job site needs in one click.

Everything you need to build a 60 in × 60 in tiled shower: sloped shower tray with centred outlet, 2 in KERDI-DRAIN, KERDI-BOARD walls and complete KERDI-BAND waterproofing with preformed corners. For an off-centre outlet, the equivalent tray is available at the same price — write to us before ordering. Adjust the quantities your job site needs in one click.

Everything you need to build a 72 in × 72 in tiled shower: sloped shower tray with centred outlet, 2 in KERDI-DRAIN, KERDI-BOARD walls and complete KERDI-BAND waterproofing with preformed corners. For an off-centre outlet, the equivalent tray is available at the same price — write to us before ordering. Adjust the quantities your job site needs in one click.

Everything you need to build a 39 in × 39 in tiled shower: the KERDI-LINE drain comes as two mandatory pieces: the channel body and the grate assembly of the same length. Both are included. For a visible finish, the grate can be replaced by a STYLE model of the same length — write to us. Adjust the quantities your job site needs in one click.

Everything you need to build a 36 in × 55 in tiled shower: the KERDI-LINE drain comes as two mandatory pieces: the channel body and the grate assembly of the same length. Both are included. For a visible finish, the grate can be replaced by a STYLE model of the same length — write to us. Adjust the quantities your job site needs in one click.

Everything you need to build a 48 in × 48 in tiled shower: the KERDI-LINE drain comes as two mandatory pieces: the channel body and the grate assembly of the same length. Both are included. For a visible finish, the grate can be replaced by a STYLE model of the same length — write to us. Adjust the quantities your job site needs in one click.

Everything you need to build a 36 in × 72 in tiled shower: the KERDI-LINE drain comes as two mandatory pieces: the channel body and the grate assembly of the same length. Both are included. For a visible finish, the grate can be replaced by a STYLE model of the same length — write to us. Adjust the quantities your job site needs in one click.

Everything you need to build a 36 in × 72 in tiled shower: KERDI-SHOWER-LTS tray and 19-11/16 in KERDI-LINE channel, wall waterproofing with KERDI membrane. Important: the grate assembly (Classic, Pure, Floral or tileable) is not included and must be chosen — write to us before ordering. Adjust the quantities your job site needs in one click.

Everything you need to build a 38 in × 76 in tiled shower: the KERDI-LINE drain comes as two mandatory pieces: the channel body and the grate assembly of the same length. Both are included. For a visible finish, the grate can be replaced by a STYLE model of the same length — write to us. Adjust the quantities your job site needs in one click.

Everything you need to build a 55 in × 55 in tiled shower: the KERDI-LINE drain comes as two mandatory pieces: the channel body and the grate assembly of the same length. Both are included. For a visible finish, the grate can be replaced by a STYLE model of the same length — write to us. Adjust the quantities your job site needs in one click.

Everything you need to build a 39 in × 39 in tiled shower: sloped side-outlet KERDI-SHOWER-LT tray, recessed KERDI-LINE-VARIO linear drain (cut-to-length channel, brushed stainless Square grate) with 2 in flange kit, KERDI-BOARD walls, niche and complete KERDI-BAND waterproofing with preformed corners. Adjust the quantities your job site needs in one click.

Everything you need to build a 36 in × 55 in tiled shower: sloped side-outlet KERDI-SHOWER-LT tray, recessed KERDI-LINE-VARIO linear drain (cut-to-length channel, brushed stainless Square grate) with 2 in flange kit, KERDI-BOARD walls, niche and complete KERDI-BAND waterproofing with preformed corners. Adjust the quantities your job site needs in one click.

Everything you need to build a 48 in × 48 in tiled shower: sloped side-outlet KERDI-SHOWER-LT tray, recessed KERDI-LINE-VARIO linear drain (cut-to-length channel, brushed stainless Square grate) with 2 in flange kit, KERDI-BOARD walls, niche and complete KERDI-BAND waterproofing with preformed corners. Adjust the quantities your job site needs in one click.

Everything you need to build a 36 in × 72 in tiled shower: sloped side-outlet KERDI-SHOWER-LT tray, recessed KERDI-LINE-VARIO linear drain (cut-to-length channel, brushed stainless Square grate) with 2 in flange kit, KERDI-BOARD walls, niche and complete KERDI-BAND waterproofing with preformed corners. Adjust the quantities your job site needs in one click.

Everything you need to build a 38 in × 76 in tiled shower: sloped side-outlet KERDI-SHOWER-LT tray, recessed KERDI-LINE-VARIO linear drain (cut-to-length channel, brushed stainless Square grate) with 2 in flange kit, KERDI-BOARD walls, niche and complete KERDI-BAND waterproofing with preformed corners. Adjust the quantities your job site needs in one click.

Everything you need to build a 76 in × 38 in tiled shower: sloped side-outlet KERDI-SHOWER-LT tray, recessed KERDI-LINE-VARIO linear drain (cut-to-length channel, brushed stainless Square grate) with 2 in flange kit, KERDI-BOARD walls, niche and complete KERDI-BAND waterproofing with preformed corners. Adjust the quantities your job site needs in one click.

Everything you need to build a 55 in × 55 in tiled shower: sloped side-outlet KERDI-SHOWER-LT tray, recessed KERDI-LINE-VARIO linear drain (cut-to-length channel, brushed stainless Square grate) with 2 in flange kit, KERDI-BOARD walls, niche and complete KERDI-BAND waterproofing with preformed corners. Adjust the quantities your job site needs in one click.

Everything you need to tile about 150 sq ft of floor: DITRA 3 mm uncoupling membrane for about 150 sq ft, KERDI-BAND to seal membrane seams and perimeter joints, ALL-SET thinset for bonding the membrane and setting the tiles. Adjust the quantities your job site needs in one click.

Everything you need to heat about 16 sq ft of floor with the Schluter system: 240 V heating cable covering 10.73 sq ft, DITRA-HEAT membrane totalling 16.8 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 16 sq ft of floor with the Schluter system: 120 V heating cable covering 10.73 sq ft, DITRA-HEAT membrane totalling 16.8 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 120 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 25 sq ft of floor with the Schluter system: 240 V heating cable covering 16 sq ft, DITRA-HEAT membrane totalling 25.2 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 25 sq ft of floor with the Schluter system: 120 V heating cable covering 16 sq ft, DITRA-HEAT membrane totalling 25.2 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 120 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 34 sq ft of floor with the Schluter system: 240 V heating cable covering 21.4 sq ft, DITRA-HEAT membrane totalling 33.6 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 34 sq ft of floor with the Schluter system: 120 V heating cable covering 21.3 sq ft, DITRA-HEAT membrane totalling 33.6 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 120 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 42 sq ft of floor with the Schluter system: 240 V heating cable covering 26.7 sq ft, DITRA-HEAT membrane totalling 42 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 42 sq ft of floor with the Schluter system: 120 V heating cable covering 26.7 sq ft, DITRA-HEAT membrane totalling 42 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 120 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 50 sq ft of floor with the Schluter system: 240 V heating cable covering 32 sq ft, DITRA-HEAT membrane totalling 50.4 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 50 sq ft of floor with the Schluter system: 120 V heating cable covering 32 sq ft, DITRA-HEAT membrane totalling 50.4 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 120 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 59 sq ft of floor with the Schluter system: 240 V heating cable covering 37.5 sq ft, DITRA-HEAT membrane totalling 58.8 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 59 sq ft of floor with the Schluter system: 120 V heating cable covering 37.5 sq ft, DITRA-HEAT membrane totalling 58.8 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 120 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 67 sq ft of floor with the Schluter system: 240 V heating cable covering 43.1 sq ft, DITRA-HEAT membrane totalling 67.2 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 67 sq ft of floor with the Schluter system: 120 V heating cable covering 43.1 sq ft, DITRA-HEAT membrane totalling 67.2 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 120 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 84 sq ft of floor with the Schluter system: 240 V heating cable covering 54 sq ft, DITRA-HEAT membrane totalling 84 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 100 sq ft of floor with the Schluter system: 240 V heating cable covering 64.4 sq ft, DITRA-HEAT membrane totalling 100.8 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 100 sq ft of floor with the Schluter system: 120 V heating cable covering 64.4 sq ft, DITRA-HEAT membrane totalling 100.8 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 120 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 100 sq ft of floor with the Schluter system: DITRA-HEAT-DUO 8 mm roll (108 sq ft) with thermal break, recommended on concrete slabs, 240 V heating cable and programmable thermostat. For installation over plywood, the standard 5.5 mm roll works — write to us. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 100 sq ft of floor with the Schluter system: DITRA-HEAT-DUO 8 mm roll (108 sq ft) with thermal break, recommended on concrete slabs, 120 V heating cable and programmable thermostat. For installation over plywood, the standard 5.5 mm roll works — write to us. The 120 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 118 sq ft of floor with the Schluter system: 240 V heating cable covering 75 sq ft, DITRA-HEAT membrane totalling 117.6 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 134 sq ft of floor with the Schluter system: 240 V heating cable covering 85.3 sq ft, DITRA-HEAT membrane totalling 134.5 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 155 sq ft of floor with the Schluter system: 240 V heating cable covering 101.9 sq ft, DITRA-HEAT membrane totalling 159.7 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 155 sq ft of floor with the Schluter system: 120 V heating cable covering 101.9 sq ft, DITRA-HEAT membrane totalling 159.7 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 120 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 193 sq ft of floor with the Schluter system: 240 V heating cable covering 128.8 sq ft, DITRA-HEAT membrane totalling 193.3 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 218 sq ft of floor with the Schluter system: 240 V heating cable covering 145.3 sq ft, DITRA-HEAT membrane totalling 218.5 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 252 sq ft of floor with the Schluter system: 240 V heating cable covering 166.7 sq ft, DITRA-HEAT membrane totalling 252.1 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 277 sq ft of floor with the Schluter system: 240 V heating cable covering 183.3 sq ft, DITRA-HEAT membrane totalling 277.4 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 311 sq ft of floor with the Schluter system: 240 V heating cable covering 203.8 sq ft, DITRA-HEAT membrane totalling 311 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 340 sq ft of floor with the Schluter system: 240 V heating cable covering 225.2 sq ft, DITRA-HEAT membrane totalling 344.6 sq ft, programmable E-WIFI thermostat included. Floor sensors ship with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 11 sq ft of floor with the Drexma system: Drexma 120 V heating cable fixed on a plastic template and embedded in Mapei Novoplan 2 Plus self-leveller (Primer T included), programmable UTN5 thermostat. The template replaces the uncoupling membrane. The floor sensor ships with the cable. The 120 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 15 sq ft of floor with the Drexma system: Drexma 120 V heating cable covering 10.3 sq ft, 2 Drexma uncoupling membrane sheets, programmable UTN5 thermostat and Keraflex Plus thinset included. The floor sensor ships with the cable. The 120 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 16.5 sq ft of floor with the Drexma system: Drexma 240 V heating cable fixed on a plastic template and embedded in Mapei Novoplan 2 Plus self-leveller (Primer T included), programmable UTN5 thermostat. The template replaces the uncoupling membrane. The floor sensor ships with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 16.5 sq ft of floor with the Drexma system: Drexma 120 V heating cable fixed on a plastic template and embedded in Mapei Novoplan 2 Plus self-leveller (Primer T included), programmable UTN5 thermostat. The template replaces the uncoupling membrane. The floor sensor ships with the cable. The 120 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 20 sq ft of floor with the Drexma system: Drexma 240 V heating mat on mesh, poured directly into the concrete slab — no mortar required. Programmable UTN5 thermostat included, floor sensor ships with the mat. The finish flooring is sold separately. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 22 sq ft of floor with the Drexma system: Drexma 120 V heating cable fixed on a plastic template and embedded in Mapei Novoplan 2 Plus self-leveller (Primer T included), programmable UTN5 thermostat. The template replaces the uncoupling membrane. The floor sensor ships with the cable. The 120 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 22 sq ft of floor with the Drexma system: Drexma 240 V heating cable covering 15 sq ft, 3 Drexma uncoupling membrane sheets, programmable UTN5 thermostat and Keraflex Plus thinset included. The floor sensor ships with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 27.5 sq ft of floor with the Drexma system: Drexma 240 V heating cable fixed on a plastic template and embedded in Mapei Novoplan 2 Plus self-leveller (Primer T included), programmable UTN5 thermostat. The template replaces the uncoupling membrane. The floor sensor ships with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 27.5 sq ft of floor with the Drexma system: Drexma 120 V heating cable fixed on a plastic template and embedded in Mapei Novoplan 2 Plus self-leveller (Primer T included), programmable UTN5 thermostat. The template replaces the uncoupling membrane. The floor sensor ships with the cable. The 120 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 31 sq ft of floor with the Drexma system: Drexma 120 V heating cable covering 20.6 sq ft, 4 Drexma uncoupling membrane sheets, programmable UTN5 thermostat and Keraflex Plus thinset included. The floor sensor ships with the cable. The 120 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 46 sq ft of floor with the Drexma system: Drexma 240 V heating cable covering 30.9 sq ft, 6 Drexma uncoupling membrane sheets, programmable UTN5 thermostat and Keraflex Plus thinset included. The floor sensor ships with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 46 sq ft of floor with the Drexma system: Drexma 120 V heating cable covering 30.9 sq ft, 6 Drexma uncoupling membrane sheets, programmable UTN5 thermostat and Keraflex Plus thinset included. The floor sensor ships with the cable. The 120 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 54 sq ft of floor with the Drexma system: Drexma 120 V heating cable covering 36 sq ft, 7 Drexma uncoupling membrane sheets, programmable UTN5 thermostat and Keraflex Plus thinset included. The floor sensor ships with the cable. The 120 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 82 sq ft of floor with the Drexma system: Drexma 240 V heating cable covering 54.5 sq ft, 11 Drexma uncoupling membrane sheets, programmable UTN5 thermostat and Keraflex Plus thinset included. The floor sensor ships with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 101 sq ft of floor with the Drexma system: Drexma 240 V heating mat on mesh, poured directly into the concrete slab — no mortar required. Programmable UTN5 thermostat included, floor sensor ships with the mat. The finish flooring is sold separately. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 110 sq ft of floor with the Drexma system: Drexma 240 V heating cable fixed on a plastic template and embedded in Mapei Novoplan 2 Plus self-leveller (Primer T included), programmable UTN5 thermostat. The template replaces the uncoupling membrane. The floor sensor ships with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 110 sq ft of floor with the Drexma system: Drexma 120 V heating cable fixed on a plastic template and embedded in Mapei Novoplan 2 Plus self-leveller (Primer T included), programmable UTN5 thermostat. The template replaces the uncoupling membrane. The floor sensor ships with the cable. The 120 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 123 sq ft of floor with the Drexma system: Drexma 120 V heating cable covering 82.3 sq ft, 16 Drexma uncoupling membrane sheets, programmable UTN5 thermostat and Keraflex Plus thinset included. The floor sensor ships with the cable. The 120 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 127 sq ft of floor with the Drexma system: Drexma 240 V heating cable covering 84.5 sq ft, 16 Drexma uncoupling membrane sheets, programmable UTN5 thermostat and Keraflex Plus thinset included. The floor sensor ships with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 130 sq ft of floor with the Drexma system: Drexma 240 V heating mat on mesh, poured directly into the concrete slab — no mortar required. Programmable UTN5 thermostat included, floor sensor ships with the mat. The finish flooring is sold separately. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 132 sq ft of floor with the Drexma system: Drexma 120 V heating cable fixed on a plastic template and embedded in Mapei Novoplan 2 Plus self-leveller (Primer T included), programmable UTN5 thermostat. The template replaces the uncoupling membrane. The floor sensor ships with the cable. The 120 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 143 sq ft of floor with the Drexma system: Drexma 240 V heating cable fixed on a plastic template and embedded in Mapei Novoplan 2 Plus self-leveller (Primer T included), programmable UTN5 thermostat. The template replaces the uncoupling membrane. The floor sensor ships with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 154 sq ft of floor with the Drexma system: Drexma 120 V heating cable fixed on a plastic template and embedded in Mapei Novoplan 2 Plus self-leveller (Primer T included), programmable UTN5 thermostat. The template replaces the uncoupling membrane. The floor sensor ships with the cable. The 120 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 154 sq ft of floor with the Drexma system: Drexma 120 V heating cable covering 102.9 sq ft, 20 Drexma uncoupling membrane sheets, programmable UTN5 thermostat and Keraflex Plus thinset included. The floor sensor ships with the cable. The 120 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 161 sq ft of floor with the Drexma system: Drexma 240 V heating mat on mesh, poured directly into the concrete slab — no mortar required. Programmable UTN5 thermostat included, floor sensor ships with the mat. The finish flooring is sold separately. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 165 sq ft of floor with the Drexma system: Drexma 120 V heating cable fixed on a plastic template and embedded in Mapei Novoplan 2 Plus self-leveller (Primer T included), programmable UTN5 thermostat. The template replaces the uncoupling membrane. The floor sensor ships with the cable. The 120 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 176 sq ft of floor with the Drexma system: Drexma 240 V heating cable fixed on a plastic template and embedded in Mapei Novoplan 2 Plus self-leveller (Primer T included), programmable UTN5 thermostat. The template replaces the uncoupling membrane. The floor sensor ships with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 185 sq ft of floor with the Drexma system: Drexma 240 V heating cable covering 123.4 sq ft, 23 Drexma uncoupling membrane sheets, programmable UTN5 thermostat and Keraflex Plus thinset included. The floor sensor ships with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 192 sq ft of floor with the Drexma system: Drexma 240 V heating mat on mesh, poured directly into the concrete slab — no mortar required. Programmable UTN5 thermostat included, floor sensor ships with the mat. The finish flooring is sold separately. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 201 sq ft of floor with the Drexma system: Drexma 120 V heating cable covering 133.7 sq ft, 25 Drexma uncoupling membrane sheets, programmable UTN5 thermostat and Keraflex Plus thinset included. The floor sensor ships with the cable. The 120 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 220 sq ft of floor with the Drexma system: Drexma 240 V heating cable fixed on a plastic template and embedded in Mapei Novoplan 2 Plus self-leveller (Primer T included), programmable UTN5 thermostat. The template replaces the uncoupling membrane. The floor sensor ships with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 222 sq ft of floor with the Drexma system: Drexma 240 V heating mat on mesh, poured directly into the concrete slab — no mortar required. Programmable UTN5 thermostat included, floor sensor ships with the mat. The finish flooring is sold separately. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 231 sq ft of floor with the Drexma system: Drexma 120 V heating cable covering 154.3 sq ft, 29 Drexma uncoupling membrane sheets, programmable UTN5 thermostat and Keraflex Plus thinset included. The floor sensor ships with the cable. The 120 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 247 sq ft of floor with the Drexma system: Drexma 240 V heating cable covering 164.6 sq ft, 31 Drexma uncoupling membrane sheets, programmable UTN5 thermostat and Keraflex Plus thinset included. The floor sensor ships with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 252 sq ft of floor with the Drexma system: Drexma 240 V heating mat on mesh, poured directly into the concrete slab — no mortar required. Programmable UTN5 thermostat included, floor sensor ships with the mat. The finish flooring is sold separately. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 264 sq ft of floor with the Drexma system: Drexma 240 V heating cable fixed on a plastic template and embedded in Mapei Novoplan 2 Plus self-leveller (Primer T included), programmable UTN5 thermostat. The template replaces the uncoupling membrane. The floor sensor ships with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 297 sq ft of floor with the Drexma system: Drexma 240 V heating mat on mesh, poured directly into the concrete slab — no mortar required. Programmable UTN5 thermostat included, floor sensor ships with the mat. The finish flooring is sold separately. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 308 sq ft of floor with the Drexma system: Drexma 240 V heating cable fixed on a plastic template and embedded in Mapei Novoplan 2 Plus self-leveller (Primer T included), programmable UTN5 thermostat. The template replaces the uncoupling membrane. The floor sensor ships with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 340 sq ft of floor with the Drexma system: Drexma 240 V heating cable covering 226.3 sq ft, 42 Drexma uncoupling membrane sheets, programmable UTN5 thermostat and Keraflex Plus thinset included. The floor sensor ships with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.

Everything you need to heat about 463 sq ft of floor with the Drexma system: Drexma 240 V heating cable covering 308.6 sq ft, 58 Drexma uncoupling membrane sheets, programmable UTN5 thermostat and Keraflex Plus thinset included. The floor sensor ships with the cable. The 240 V connection must be done by an electrician. Adjust the quantities your job site needs in one click.