HENRY® 440 is a latex-based, wet-set adhesive for installing rubber and vinyl cove base, residential and commercial. Its aggressive initial grab stops the base from slipping during installation — no open time, no holding it in place by hand.
It resists plasticiser migration, which is what prevents vinyl base from working loose over time. Cleans up with water and carries a zero VOC content.
This 11 oz cartridge works with a standard caulking gun — the size for touch-ups and small jobs.
- Aggressive initial grab — no open time required
- Plasticiser migration resistant
- VOC: 0 g/L (SCAQMD 1168)
- Cleans up with water
- Freeze-thaw stable to -12 °C
- Excellent trowelability
- 10-year limited warranty
- Made in the USA
Can be used on
Concrete, concrete block, gypsum drywall, plaster, wood, plywood, brick, plastic laminate, and abraded glazed surfaces or metal.
Coverage
| 4 in. cove base — 1/8 in. bead | 27 lin. ft. per 11 oz cartridge |
Cut the spout near the tip to produce a 1/8 in. bead. Use two beads for 2½ in. base, three for 4 in., five for 6 in.
Specifications
| Brand | Henry |
| Range | 440 |
| Composition | Wet-set latex |
| Size | 11 oz (325 ml) cartridge |
| Colour | Beige |
| VOC content | 0 g/L |
| Applicator | Standard caulking gun |
| Units per case | 24 |
| Shelf life | 1 year, unopened |
| Warranty | 10-year limited |
| Reference | 12105 |
