Ardex - OVP Concrete Ceiling and Vertical Wall Finish, Gray - 20 lb

ARDEX OVP™ is a trowelable Portland cement-based finishing compound used to fill and smooth interior and exterior vertical concrete surfaces such as tilt-up walls, pre-cast or poured in place concrete panels, and other concrete or masonry surfaces prior to sealing or painting.

Key Features

• Portland cement-based
• Deep fill and skim coat
• High yield
• Easy to mix and apply
• Long pot life for large jobs
• Available in gray

Installation

Mixing Ratio: 5 quarts (4.8 L) of water per one 20 lb. (9 kg) bag. For smaller batches, use 2 parts powder to 1 part water by volume
Material Requirements on Smooth Substrate (approx.):
133 sq. ft. (12.35 sq. m) per bag at 1/16″ (1.6 mm)
66.6 sq. ft. (6.18 sq. m) per bag at 1/8″ (3.2 mm)
33.3 sq. ft. (3.09 sq. m) per bag at 1/4″ (6.4 mm)
When skimming over smooth concrete, coverage is approximately 300 sq. ft. (27.87 sq. m) per bag

Performance

Pot Life: 90 minutes
Working Time: 30 minutes
Time to Seal or Paint: 2 to 3 hours, depending on jobsite conditions
VOC: 0
Packaging: 20 lb. (9 kg) net weight
Storage: Store in a cool dry area. Do not leave bags exposed to sun. Tightly seal unused material.
Shelf Life: Nine months if unopened
Warranty: ARDEX L.P. Standard Limited Warranty applies.