Impex Stone - Kenora - Natural Stone on Mesh - 55 x 20 cm - 3.55 sq. ft. box

Impex Stone Kenora natural stone is pre-assembled on galvanized metal mesh for faster installation. It can be installed indoors or outdoors.

• 3 pieces per box, covering 3.55 sq. ft. (0.33 m²).
• Indoors, install with LTC white or LTC grey adhesive mortar; outdoors, with Mason Bond 400. Back-butter both wall and stone.
• Adhesive must be worked between the stones on the back of the mesh to make the assembly watertight. Filling the front gaps with King 1-1-6 mortar is optional.
• Impex Stone recommends a staggered layout to avoid continuous straight lines.

Substrate preparation

• Recommended substrate: lightweight concrete board (DuROCK^®, PermaBASE^®).
• Indoors: gypsum board with galvanized lath up to 4 ft high; above that, lightweight concrete is required.
• Outdoors: galvanized lath required; no more than 4 ft of height per day without anchoring.
• Plywood: asphalt paper then galvanized lath, at any height.
• Filling the lath: allow one extra bag of adhesive mortar per 30 sq. ft.

Quantities

• Adhesive mortar (Mason Bond or LTC): one bag covers about 30 sq. ft.

Impex Stone’s full installation guide is in the Documents section of this page.

Warranty

Manufacturer’s 10-year limited warranty from the date of purchase, with proof of purchase, when the product is installed in accordance with the National Building Code and Impex Stone’s installation guide. It covers defective materials only (labour excluded), is limited to the original purchaser and excludes, among others, non-compliant installation, wall movement, contact with chemicals, and discolouration caused by water, pollutants or friction. Full terms are in the installation guide.