Impex Stone - Paintable - Brick Veneer - 19 x 6 cm - 10.76 sq. ft. box

Impex Stone Paintable brick veneer is installed indoors, on walls and fireplaces. A ready-to-paint surface for a wall in the colour of your choice.

• About 64 pieces per box, covering 10.76 sq. ft. (1 m²).
• Install with LTC white or LTC grey adhesive mortar, back-buttering both wall and stone.
• 1/4 to 3/8 in. joints in Type N 1-1-6 mortar, applied with a mortar cone the day after installation.

⚠️ Never clean with water: colours may bleed. Vacuum or use a feather duster.

Substrate preparation

• Recommended substrate: lightweight concrete board (DuROCK^®, PermaBASE^®).
• Painted gypsum board accepted without lath up to 8 ft high; galvanized lath required above that.
• Plywood: asphalt paper then galvanized lath, at any height.
• Filling the lath: allow one extra bag of adhesive mortar per 30 sq. ft.

Quantities

• LTC adhesive mortar: one 50 lb bag covers 40 to 50 sq. ft. with the recommended tools.
• King 1-1-6 mortar: one bag covers 40 to 50 sq. ft. with 3/8 in. joints.

Impex Stone’s full installation guide is in the Documents section of this page.

Warranty

Manufacturer’s 10-year limited warranty from the date of purchase, with proof of purchase, when the product is installed in accordance with the National Building Code and Impex Stone’s installation guide. It covers defective materials only (labour excluded), is limited to the original purchaser and excludes, among others, non-compliant installation, wall movement, contact with chemicals, and discolouration caused by water, pollutants or friction. Full terms are in the installation guide.