Kinesik - Ecoglo RC4-E30 Photoluminescent stair nosing for carpet with 3.5" gray non-slip strip (sold in linear feet)

The RC series stair nosing is a right-angled aluminum stair nosing for installation on the edge of public stair steps, exits and all other locations where slip resistance or non-contrasting or low contrast stair edges are a problem. The Ecoglo RC series step edge has a 2-inch (51 mm) segment that provides a 2-inch (51 mm) non-slip surface on the step. The RC series stair nosing is designed to prevent falls and improve evacuation speed.

• To install with polyurethane adhesive and mechanical fasteners, or with adhesive alone
• Supplied with pre-drilled chamfered holes. Includes stainless steel fasteners and nylon concrete anchors. Hole locations: 2" from each end and approximately 12" apart
• Available in pre-cut lengths (tolerance ± 1/8 in.). Standard lengths of 8 and 10 ft
• The segments are supplied unfixed. The segments are installed on the mechanical fasteners using a polyurethane adhesive (included). The segments can be cut using shears. The aluminum part of the stair nosing can be cut with a saw. Cutting the segments with a saw will damage the saw blade. The segments are attached using a premium polyurethane adhesive