Rubi - Long-arm tile spacers for 3 mm (1/8") joints - Bag of 200

Long-arm version of the 3 mm spacer. The longer arms bear further onto the tile, which holds alignment better than a short spacer.

Rubi recommends this version for wall cladding as much as for floors laid in large format or rectified tile with a thin joint. The internal geometry is designed to resist bending and crushing.

• 3 mm (1/8") joint
• Long arms, better bearing on the tile
• Bag of 200
• Polypropylene

Remove before grouting

Rubi presents only the hollow 5 to 12 mm spacers as able to be left in the joint. This one comes out before you grout.

Can be used for

• Rectified tile on a 1/8" joint
• Large format on the floor
• Wall cladding where alignment has to hold

Specifications