Sac de ciment-colle modifié Schluter ALL-SET blanc 50 lb
Ciment-colle Schluter ALL-SET sous et sur la membrane de désolidarisation DITRA
Ciment-colle Schluter ALL-SET sur la membrane d'étanchéité KERDI

CERAMED – 🍁Proudly Canadian🍁

SKU: SETA50W Distributor SKU: SETA50W

Schluter - ALL-SET - Modified thinset mortar - white 50 lb

Sale price
$55.47
Regular price
$61.64
You save
$6.17 (10%)
Taxes and shipping calculated at checkout
Ceramed PRO You could pay as little as Price reserved for Ceramed PRO members
Discover the PRO benefits
  • Preferred pricing on over 400 brands
  • Dedicated service for construction and renovation professionals
  • Application reviewed within 24 to 72 hours
Colour:
White
10400 in stock across our Canadian locations — available for shipping or pickup
View stock and pickup by warehouse

Frequently Bought Together

Tick to add these products to your cart together with this one.

Product Information

Schluter ALL-SET white is a specialized modified thin-set mortar that meets ANSI A118.15H and A118.4H. It is designed to work with DITRA and DITRA-HEAT uncoupling membranes, KERDI waterproofing membranes, KERDI-BOARD panels and the Schluter Shower System. It can also be used to set porcelain, ceramic and stone in other industry-approved assemblies.

The white version is the one to use for light-coloured stone, mosaics and translucent marble. Remove the mortar ridges so they do not show through the tile.

Benefits

  • Polymer technology that meets or exceeds ANSI A118.15 for high-performance thin-set mortar
  • For porcelain and ceramic tile of any shape, size and weight, and most stone
  • Proven performance with Schluter products
  • VOC-free Portland-limestone cement with a reduced carbon footprint

Uses

  • Shower walls, floors and ceilings, including steam showers
  • Installing Schluter membranes and boards
  • Most interior tile and stone installations
  • A limited number of exterior installations

Suitable substrates: concrete, plywood and OSB, masonry (concrete block, brick), substrate preparation materials (Portland cement mortar, self-levelling underlayment, etc.) per their manufacturer, and Schluter membranes and boards.

Mixing

  1. Pour clean, potable water into a clean bucket: 5.7 to 6.6 L (6 to 7 qt) per 50 lb bag for installing Schluter membranes, 4.8 to 5.5 L (5.1 to 5.8 qt) for setting tile.
  2. Add the powder slowly while mixing at low speed (under 300 rpm) for 5 minutes.
  3. Let it slake for 10 minutes, then remix at low speed for 3 minutes.

For membranes, the mix should be fairly fluid but still hold a trowel notch. Do not add water after mixing.

Installation

First key in a thin coat with the flat side of the trowel, then comb the mortar with a notched trowel, ridges in one direction: DITRA-TROWEL for DITRA, DITRA-HEAT / DITRA-XL-TROWEL for DITRA-HEAT and DITRA-XL, KERDI-TROWEL for KERDI. Embed tile and membranes solidly, and lift one from time to time to check coverage: over 80% in dry areas, over 95% in showers and exteriors (ANSI A108.5). From 12" x 12" (305 x 305 mm), back-butter the tile as well. Respect the open time: mortar that has skinned over is removed and replaced.

Install between 4 °C and 35 °C (40 °F and 95 °F), and protect the installation from traffic and water for at least 24 hours. Do not exceed 1/2" (12.5 mm) under the tile. Do not use ALL-SET with moisture-sensitive stone such as green marble; for glass tile and back-coated stone, contact Schluter technical services.

Coverage per 50 lb bag

Approximate values from Schluter.

Membrane to substrate
DITRA-TROWEL 11/64" x 11/64" (4.5 mm)150 ft² (13.9 m²)
DITRA-HEAT / DITRA-XL-TROWEL 1/4" x 1/4" (6 mm)100 ft² (9.3 m²)
KERDI-TROWEL 1/8" x 1/8" (3 mm)200 ft² (18.6 m²)
Tile to membraneDITRA / DITRA-HEAT · DITRA-XL · KERDI / KERDI-BOARD
1/4" x 1/4" (6 mm) trowel60–70 ft² · 45–55 ft² · 90–100 ft²
1/4" x 3/8" (6 x 9.5 mm) trowel40–50 ft² · 35–45 ft² · 55–65 ft²
3/4" (19 mm) trowel25–35 ft² · 20–30 ft² · 30–40 ft²

Which Schluter thin-set to choose?

FAST-SET is the rapid-setting version of ALL-SET, and the only one of the three that can bond DITRA over vinyl flooring. SET, Schluter's unmodified thin-set, is not suitable for plywood or OSB: on those substrates, use ALL-SET or FAST-SET.

Specifications
Type Specialized modified thin-set mortar
Standards ANSI A118.4H, A118.15H, A118.11
Colour White
Size 50 lb (22.7 kg) bag
Open time 20 to 30 minutes (at 21 °C)
Pot life 2 to 4 hours (at 21 °C)
Time before grouting 12 hours (at 21 °C)
Time before foot traffic 24 hours (at 21 °C)
Installation temperature 4 °C to 35 °C (40 °F to 95 °F)
Maximum thickness 1/2" (12.5 mm)
Mixing water per bag Membranes: 5.7 to 6.6 L · tile: 4.8 to 5.5 L
Use Interior; a limited number of exterior installations
Shelf life 2 years in the unopened bag, stored dry, cool and protected from freezing
VOC emissions (CDPH 1.2) None detected
Warranty One-year limited warranty on the mortar; lifetime system warranty with applicable Schluter products
FAQ Questions? Browse the Ceramed store FAQ.

Construction professionals?

Get exclusive pricing and access to 400+ brands with Ceramed Pro.

FAQ

Schluter calls for unmodified thin-set over DITRA and KERDI. Why are ALL-SET and FAST-SET, which are modified, accepted?

To set tile over DITRA, DITRA-HEAT and KERDI, Schluter requires its SET, ALL-SET or FAST-SET mortars, or an unmodified thin-set meeting ANSI A118.1.

A regular modified thin-set must air-dry to cure: sandwiched between the membrane and porcelain tile, it can take from 14 to over 60 days to dry. ALL-SET and FAST-SET are formulated to set and gain strength in a timeframe that fits typical installation practice, even there.

Can I set tile over DITRA or KERDI with another brand's modified thin-set?

No. Schluter has no control over other manufacturers' modified formulas and cannot guarantee results with them on its boards and membranes.

An unmodified thin-set meeting ANSI A118.1, of any brand, is still accepted for setting tile. To bond DITRA to an approved substrate, Schluter also accepts other manufacturers' modified thin-sets.

SET, ALL-SET or FAST-SET: which one should I choose?

By substrate under DITRA: over concrete or gypsum, all three; over plywood or OSB, ALL-SET or FAST-SET (not SET); over vinyl flooring, FAST-SET only. For KERDI over gypsum board, cement or fibre-cement board, all three.

FAST-SET is rapid-setting: grout after 4 hours, but a 30-minute pot life, against 2 to 4 hours for SET and ALL-SET.

Can I bond the membrane, then add powder to the leftover mix to set the tile?

No: make two mixes. For the membrane, the mortar should be fairly fluid but still hold a notch. For tile, it is stiffer: it spreads easily without falling off the trowel.

With ALL-SET, for example, use 5.7 to 6.6 L of water per 50 lb bag for the membrane and 4.8 to 5.5 L for tile. Once mixed, add neither water nor powder.

My thin-set is stiffening in the bucket. Can I add water?

No. After the initial mix and the 10-minute slake, add no more water. You can remix it within its pot life, 2 to 4 hours at 21 °C.

The amount of water varies slightly with site conditions; following the slake time, you generally need less.

At what speed should I mix ALL-SET?

At low speed, under 300 rpm: mix 5 minutes, let it slake 10 minutes, then mix again for 3 minutes. Add the powder to the water, not the reverse.

The spread mortar has skinned over. What now?

ALL-SET's open time is 20 to 30 minutes at 21 °C. If the mortar has skinned over, remove it and spread fresh mortar; do not set membrane or tile into it.

How many bags of ALL-SET do I need?

First choose the trowel for the tile type and size, then read the coverage table on this page.

Example for a 100 ft² floor over DITRA: about 1 bag to bond the membrane (150 ft² per bag with the DITRA-TROWEL), then 2 to 3 bags for the tile with a 1/4" x 3/8" trowel (40 to 50 ft² per bag). Values are approximate.

Can I mix a small batch instead of a full bag?

Yes. Schluter recommends first mixing full bags with measured water to learn the right consistency. Then divide powder and water in the same proportions.

Should I choose white or grey thin-set?

White is for installations where the mortar colour can show: light or translucent stone, mosaics, translucent marble, light grout. Grey goes with dark stone and dark grout. Both colours have the same properties.

Are Schluter thin-set mortars suitable for large-format and heavy tile?

Yes. All Schluter mortars can set large-format and heavy tile; ALL-SET also meets ANSI A118.15H.

Increase the notch size as the tile gets larger (see the MULTI-TROWEL), back-butter tile from 12" x 12", and lift one from time to time to check coverage: over 80% in dry areas, over 95% in showers and exteriors.

Can I use Schluter thin-set over a gypsum underlayment?

Yes, if the underlayment is prepared per its manufacturer's instructions (priming or sealing). Before installing a Schluter uncoupling membrane, its residual moisture must be 2.0% or less.

Can I install in cold weather?

Ambient and surface temperatures must stay between 4 °C and 35 °C. The colder it is, the longer the curing times, before and after installation. Protect the installation from freezing for at least 28 days.

How long before grouting and walking on the floor?

At 21 °C: 12 hours before grouting, 24 hours before foot traffic. Cooler conditions lengthen these times.

Protect the installation from traffic and water for at least 24 hours, and from freezing for at least 28 days.

When can I use the shower?

With ALL-SET, you can grout 12 hours after setting the tile (at 21 °C). After that, the grout sets the wait before the first shower: follow the grout's data sheet.

How long before I can tile over KERDI?

No wait is needed to tile: once the membrane, seams, corners and protrusions are bonded, the assembly is ready.

Schluter does recommend a water test before setting tile, and building officials may require it. Wait 24 hours after installing KERDI and KERDI-BAND before that test, so the seam mortar can set.

Which mortar should I use for KERDI and KERDI-BAND seams?

SET, ALL-SET, FAST-SET or an unmodified thin-set. To bond KERDI, the mortar must penetrate the membrane's fleece; for seams, these four options are required for a watertight system.

When can I turn on DITRA-HEAT?

Wait at least 7 days after grouting, longer for natural stone.

A 5 to 10-minute test right after installation, to check that it works, is safe.

Can I use Schluter thin-set outdoors or in a water feature?

Outdoors, yes, following the DITRA Installation Handbook or the DITRA-DRAIN data sheet.

For a pool or water feature, the Shower System details do not apply to water-retaining applications: contact the Ceramed PRO team (ceramedpro@ceramed.ca, 1-877-306-2158), who will confirm the assembly with Schluter. The lifetime system warranty excludes exterior, submerged and steam room applications.

Can I set glass tile, resin-backed tile or green marble with Schluter thin-set?

All three need to be checked before installation. Moisture-sensitive stone such as green marble and resin-backed tile may need special setting materials; for glass tile, Schluter asks to be consulted.

Contact the Ceramed PRO team (ceramedpro@ceramed.ca, 1-877-306-2158) with the tile you plan to use: they will check with Schluter and the tile supplier.

How do I get the lifetime warranty with Schluter thin-set?

Three steps: 1) install an eligible Schluter system (DITRA or DITRA-XL, the Shower System, KERDI or KERDI-DS, DITRA-HEAT or DITRA-HEAT-DUO); 2) use SET, ALL-SET or FAST-SET; 3) register the system online within 90 days with the Schluter registration form.

Without registration, the mortar alone carries a one-year limited warranty.

Can I level the floor or grout with Schluter thin-set?

No. Thin-set is not designed to level floors: any leveling or sloping is done with a floor preparation material before the membranes, and ALL-SET, for example, must not exceed 1/2" (12.5 mm).

It is not a grout either, as it is not a wear surface.

How long does a bag of ALL-SET keep?

Two years from the date printed on the side of the bag, if unopened, never frozen and stored in a cool, dry place away from sunlight, heat and weather.

Recommended For You