30" - Sigma Tile Cutter Series 3

Description

The Max Series push handle creates less user fatigue than the traditional pull handle. It features a spring-loaded knurl that wraps around a stainless steel ball bearing. This not only ensures the smoothest possible feel, but also gives the wheel the ability to adapt to the undulations of a textured surface. The results are incredible! Series 3 MAX "New series with Max handle." The ball-bearing-mounted scoring wheel is vibration-damped to score thicker tiles or those with raised surfaces with minimal effort. Transitioning from the scoring position to the breaking position is achieved with a small vertical movement of the handle. Large tile support table, with the added benefit of conveniently measuring close to the operator. Double recording for regulating the cutting thickness. The pivoting measuring bar supporting the tile rotates 45° in both directions and is pivoted to the center of the cutting line, allowing the actual measurement of the piece to be cut to be obtained. A measuring scale at 45° per second gives the length of the diagonal. Measurements are in centimeters or inches on request. The quick positioning knob makes the main angles normally used immediately available. Easy to disassemble to ensure compact dimensions for easy transport. Push cutting system Extremely strong, allows easy cutting of particularly thick or difficult materials, with the added benefit of conveniently measuring close to the operator. Precision, practical use and low weight are the main characteristics of Sigma tile cutters. Suitable for cutting all types of commercially available tiles. Made with a high-strength aluminum alloy and steel structure in a wide range of models, also with accessories for diagonal cuts. The special shape of the handle allows you to cut tiles at any time. Movement on bearings, recording for wear recovery on the sides, plastic fitting to avoid marks under the brittle feet. The lever handle is used to score the tile with a tungsten carbide wheel. The tile is then broken by pressing with the breaking feet near the edge of the tile. .

• Super-smooth ball bearing centered on a 19mm wheel
• Spring suspension system is particularly suitable for uneven and bordering tiles
• Scores while pushing (can also pull)
• Tilting breaker allows breaking along the entire length of the tile
• Rotating ruler/measuring bar rotates up to 45 degrees in either direction
• Genuine spring-loaded base plates
• Excellent on porcelain tiles
• Maximum tile thickness: 20mm (NOT RECOMMENDED FOR 20mm THICK PORCELAIN)
• Smart dual metric scale for square and 45-degree cuts (measuring from the corner of the tile to the cut line) cut)

Specifications