Laticrete - PERMACOLOR Select - Color Kit - #96 Steamship 100 g

The LATICRETE PERMACOLOR Select Color Kit holds one dry pigment pod that colors PERMACOLOR Select grout base, here in #96 Steamship. The pod dissolves in the mixing water, so you keep a single grout base in stock and get consistent color from one mix to the next.

Benefits

• Consistent color from mix to mix
• Mixes with water only: the water-dispersible pod dissolves completely
• One grout base to stock for every color
• Can also tint some other LATICRETE products, per the data sheet
• GREENGUARD certified for low emissions

Mixing

1. Pour the clean water into a clean container.
2. Remove the pod from its outer packaging, drop it in the water and mix with a drill until the pigment is fully dispersed.
3. Add the PERMACOLOR Select base and mix for 1 minute at low speed (300 RPM). The mix may look dry: do not add water.
4. Let it slake for 5 minutes, then remix for 1 minute before grouting.

Before you install

• Final shade depends on lighting, tile and site conditions: test on a small area first.
• Porous tile can trap pigment: seal it before grouting.
• Blend products with different lot numbers on the same project.
• Do not use acid to clean colored grout joints.

Warranty

Used with PERMACOLOR Select base and eligible LATICRETE products, the color kit is covered by the LATICRETE system warranties, under the conditions of the attached warranty documents.