PRIMER-PS is a ready-to-use, fast-drying topical primer designed specifically for Schluter self-adhesive membranes. It is formulated to improve membrane adhesion to hard-to-bond surfaces such as OSB, plywood, gypsum-based concrete or vinyl. PRIMER-PS is suitable for interior applications where increased adhesion is required on various porous and non-porous substrates.
- Compatible with DITRA-PS, DITRA-HEAT-PS and DITRA-HEAT-DUO-PS membranes
- Dries in as little as 15 minutes, depending on the conditions in the application area
- Ready-to-use product that is applied in a single coat with a roller or broom
- Water-based, single-component, solvent-free formula
- Low-odor, VOC-free product
- Freeze-thaw stability
SPECIFICATIONS
| Brand |
Schluter |
| Product type |
Primer |
| Storage conditions |
PRIMER-PS must be stored between 10 °C (50 °F) and 32 °C (90 °F). Keep containers tightly closed when not in use. Rotate stock and use the oldest product first |
| Shelf life |
12 months from the manufacturing date indicated on the packaging in unopened and properly stored containers |
| US gallons |
1 |
| Clearance |
false |
| Liter (L) |
3.78 |
| Collection name |
PRIMER-PS |
| Weight (kg) |
3.94 |
| Weight (lb) |
8.68 |
| Quantity per pallet |
120.00 |
| Quantity per package |
4.00 |
| Freeze/thaw resistance |
Yes. 1 cycle at -18 °C (0 °F). If the primer has frozen, allow it to thaw at room temperature. Sedimentation of the solid resin may occur following a freeze-thaw. Mix well before use |
| Used with |
DITRA-PS, DITRAHEAT-PS and DITRA-HEAT-DUO-PS |
| Moisture vapor emission rate (MVER) |
8 lbs per 1000 ft² |
| Drying time |
10 to 60 minutes |
| Outdoor use |
No |
| Indoor use |
Yes |
| Thickness (mm) |
3.5 |
| Thickness (in.) |
0.13 |
| Thickness (inch as fraction) |
1/8 |
