2' 7" x 3' 3" - (8.4 sq ft) 5 mm - Schluter DITRA-HEAT-PS Self-adhesive uncoupling membrane in panel for heated floors

Schluter-DITRA-HEAT-PS is a self-adhesive membrane that features a pressure-sensitive adhesive that allows the membrane to be bonded to the substrate without the use of thin-set mortar. Quick and easy to install, the DITRA-HEAT-PS membrane integrates the features of the DITRA-HEAT membrane into a customizable and comfortable floor heating system: uncoupling, waterproofing, vapor management, and support necessary for a durable installation.

• Simply remove the transparent release liner from the felt side of the membrane to expose the adhesive layer and embed it in the substrate.
• Without thinset mortar, the membrane installation is quick and easy.
• If no pressure has been applied to the membrane, it can be easily repositioned.
• Installation produces less mess and requires fewer cleanup and tools.
• The DITRA-HEAT-PS membrane's cleat structure is specially designed to allow for easy installation of the DITRA-HEAT-HK heating cables.
• The nominal thickness of 1/4" (5.5 mm) limits the overall assembly thickness and reduces the transition height with lower coverings.
• It is not necessary to cover the cables with a self-leveling compound in the membrane.
• If the installation area requires a membrane that meets or exceeds the requirements of ANSI A118.10, please choose DITRA-HEAT or DITRA-HEAT-DUO, for use with thin-set mortar. DITRA-HEAT-PS and DITRAHEAT-DUO-PS membranes can also be covered with Schluter-KERDI, which is certified to ANSI A118.10.

Specifications