The POWERVAC ENERGY turns any Ø 200 mm manual suction cup with a removable piston into an electric tool. Take out the manual piston, screw the pump in its place: the existing cup becomes automatic.
Its main advantage is safety. The pump restarts by itself as soon as pressure falls below 55 kPa and brings it back to 70 kPa — without the installer having to watch an indicator or re-pump. That is what prevents an unexpected drop mid-handling.
The 3.7 V / 0.9 Ah battery lasts up to 24 hours in normal use, because the pump only runs for a few seconds at a time. Recharges over USB-C in about three hours.
Converts a Ø 200 mm manual suction cup with removable piston
Electric pump — no manual pumping
Automatic restart below 55 kPa, back up to 70 kPa
Maximum recommended load of 120 kg
3.7 V / 0.9 Ah lithium battery — up to 24 hours of runtime
USB-C recharge in about 3 hours
1 m USB-C to USB-A cable included
Storage case for the manual piston included
Manual or electric operation depending on the task
3-year warranty, free extension through the RUBI Club
⚠️ Charger not included
The cable is supplied, the charger is not. A 5 V charger delivering no more than 2 A is required — a standard phone charger will do.
Compatibility
Any Ø 200 mm manual suction cup with a removable piston, including:
