Rubi - 1/8" Tile Spacers (Pack of 1000)

RUBI spacers undoubtedly constitute a truly essential range for obtaining perfect finishes during any ceramic tile installation work. RUBI manufactures spacers for joints with high quality base material and, for this reason, they do not present any type of imperfections or burrs. Spacers for 1, 1.5, 2 and 3 mm joints are recommended for laying ceramic tiles and coverings with a minimum of joints. The massive structure of the spacers for 1, 1.5, 2 and 3 mm joints has been designed to offer greater resistance to bending and crushing. These properties make transverse joints for 1, 1.5, 2 and 3 mm joints highly recommended for coverings with large format ceramic tiles. The L (long) versions of the 2 and 3 mm spacers are perfect, both for cladding and for paving with large format or rectified ceramic tiles, with a thin joint. The internal geometry of the crosspieces for 3mm long and 4mm joints has been designed to provide greater resistance to bending and crushing. These properties make 3 mm long joint spacers highly recommended for coverings with large format ceramic tiles. The internal geometry of the 5 to 12 mm joint crosspieces is hollow and features a design with internal reinforcements that allows them to resist stress and prevent crushing. This hollow design facilitates the entry of the joint mortar and, if the type of installation allows it, leaves the spacer inside the installation joint without affecting the integrity of the joint in the future. RUBI's 5 mm reinforced spacers are spacers with greater rigidity, specially designed for use on large format floor tiles. The underside of the 5 mm reinforced crosspieces is designed to provide good settlement in the material and facilitate, if the type of installation permits, the crosspiece being inside the installation joint without being able to affect its integrity in the future. The professional installer is very aware of the importance of using high quality separators, as the finish of his work can be seriously damaged due to imperfections and irregularities. RUBI crosspieces are distinguished by the regularity of their production, the homogeneity of measurements and the absence of burrs and any other small defects. These particularities allow professionals who trust RUBI crosses, Ts and wedges to obtain excellent finishes and with total precision. RUBI is committed to quality. All our products and tools undergo rigorous quality examinations by experienced professionals. We want all the products we have on the market to be recognized for their quality and durability. This desire has made our brand one of the most appreciated values ​​for offering quality solutions to professionals in ceramic tile installation and construction.